Network cable testers would be the best answer for you who seek the solution for testing the network. You will find that network cable testers come in many forms. This will give you the ability to choose ones that will fulfill your needs perfectly.
Generally, the network cable testers are battery powered devices that will help you to check the insulation losses and crossed wiring in the network line. You will find that they are easy to operate, and may have special adapters for certain types of cabling.
When using network cable testers, there are some steps that you have to do in order to get the perfect result of testing. As the other cable testers, these types of cable tester work in almost the same ways. The following are some steps that you have to follow in doing the testing.
The first thing that you have to do in using the network cable testers is removing all cables from any source of electrical power. In this case, the cables to be tested must be free of any other cable packages. You have to make sure that there is no other cable.
The second thing that you have to do in using the network cable testers is inspecting the cable for any signs of physical damage. This can save a lot of time and money if the cable is visually checked for any breaks or broken connectors. Cables in this condition should be replaced.
The third thing that you have to in using the network cable testers is shorting the conducting ends of the cable to an earth ground. Attach an alligator clip to an earth electrical ground. Connect the other end of the clip to one of the cable’s metal pins. This will drain any errant static voltage that may be stored in the cable. Perform this on each metal pin connector. Some dielectric insulation can store a charge in some types of shielded cables. This static build up may damage the tester or give false readings.
The next step that you have to do n using network cable testers is attaching the cable into the tester. Use any adapter that is compatible with the tester and cable. Some manufacturers use proprietary connectors for their own brand of tester. Typically, both ends will be connected at the same time. This will check for crossed wires, connection continuity, and open or broken wires.
The last step that you have to do in using network cable testers is switching the tester unit on. Select the type of test you want performed on the cable by turning the front selector switch. Push the test button. Some testers will have an LCD display to show the results. Others may have an analog meter, and less expensive testers may simply have a red and green light.
One of network cable testers that you can choose is Paladin Tools 70025 RJ45 Network Cable Tester Kit. The kits that include to this product are tester set, patch cords, battery and nylon storage case. This device comes with LED clearly lights for each pin as the unit goes through the test cycle.
This is an option of network cable testers that verifies proper cable configuration and good connections. The cable test begins automatically once the cable is plugged in and the power button is on to identify open, short or crossed connections. Surely, this will become a great option for you to consider.
Comments on this entry are closed.